description: this document describes valueram's 16m x 64-bit (128mb), cas latency 2 (cl2) sdram (synchronous dram) 100mhz low profile memory module. the components on this module include eight 8m x 16-bit (2m x 16-bit x 4 bank / pc100 components) sdram in tsop packages. this 168-pin dimm uses gold contact fingers and requires +3.3v. the electrical and mechanical specifications are as follows: features: clk cycle time (t cc ) min. = 10ns (cas latency = 2) / max. = 1000ns row cycle time (t rc ) 70ns clk to output (ts ac ) max. = 6ns (cas latency = 2) single power supply of +3.3v (+/- .3v) power 2.244 w (operating) ul rating 94 v - 0 document no. valueram0003.b00 02/27/02 figure 1: kvr100x64c2l/128 168-pin sdram module kvr100x64c2l/128 100mhz sdram 168-pin low profile pc100 dimm memory module
note: the module defined in this data sheet is one of several configurations available under this part number. while all configurations are compatible, the dram combination and/or the module height may vary from what is described here. however, in no configuration will the module height exceed 1.2" (30.48mm).
|